
Certified inspectors find hidden mold before it spreads
Black Mold Inspection in VAN NUYS, California
Black Mold Inspection in VAN NUYS, California is the fastest way to find out whether that dark stain or musty smell is actually toxic mold. We inspect apartments, single-family homes, and commercial buildings across the San Fernando Valley with thermal imaging and lab-grade sampling. If you have water damage, a recent leak, or a crawl space that stays damp, call (833) 929-5837 and we'll get an inspector out the same day.
What's included
What's Included in Every Inspection
Every black mold inspection includes a full visual walkthrough, moisture mapping with a moisture meter and thermal imaging camera, air and surface sampling sent to an accredited lab, and a written report with photos and a remediation scope. Here's what that looks like in practice.
Full Visual Walkthrough
We inspect every room, closet, utility space, attic, and crawl space. Under sinks, behind appliances, around window frames, inside the HVAC closet. We photograph anything suspicious and note it on a floor plan sketch so you can see exactly where the problem areas are.
Moisture Mapping
A moisture meter and thermal imaging camera scan walls, ceilings, and floors for hidden wet zones. The thermal camera reads temperature differences behind drywall, so we find damp cavities without cutting holes. Where we need to see inside, a boroscope inspection camera slips through a quarter-inch opening.
Air and Surface Sampling
We take air samples with a calibrated pump and surface samples with sterile swabs. Samples go to an accredited lab, and results come back in 24 to 48 hours. Air sampling compares indoor spore counts against an outdoor baseline, which is the standard way to confirm HVAC mold contamination.
Written Report with Photos
You get a report with photos, thermal images, moisture readings, lab results, and a room-by-room remediation scope. If remediation is needed, we explain what it involves and what it costs. If it isn't, we tell you that too and show you how to keep the area dry.
Remediation Scope and Pricing
If the inspection confirms active growth, we provide a written scope with square footage, containment requirements, and material removal notes. You can use it to compare bids or hire us to do the work. Either way, you have a document that gets you accurate pricing.
Service overview
What Black Mold Inspection in VAN NUYS, California Covers
Black mold inspection is a room-by-room assessment that locates active mold growth, traces the moisture source feeding it, and confirms the species through laboratory analysis. We start with a moisture meter and thermal imaging camera to map wet zones behind drywall, under flooring, and inside wall cavities. A boroscope inspection camera lets us see inside closed cavities without tearing the wall open. Every inspection follows the ANSI/IICRC S520 Standard for mold assessment, so the findings hold up for landlords, insurers, and escrow.
VAN NUYS properties have specific mold problems. The 1950s ranch homes and mid-century apartment buildings along Van Nuys Boulevard Corridor were built before modern vapor barriers, so crawl space mold and attic mold are common after a wet winter. When the Sepulveda Basin floods or a swamp cooler line drips through August, water damage mold shows up fast. If you've been searching for black mold testing near me VAN NUYS, we handle the full inspection and give you a written report with photos, lab results, and a scope of work.
The service timeline
How Our Inspection Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Screening
We ask what you're seeing and smelling, when it started, and whether there's been a leak or flood. That tells us what equipment to bring. If you describe an emergency black mold inspection VAN NUYS situation, we prioritize you for same-day service. Calls come in at (833) 929-5837.
Visual Walkthrough
Our inspector walks every room, closet, and utility space. We check under sinks, behind appliances, around window frames, and inside the HVAC closet. We photograph anything suspicious and note the moisture readings on a floor plan sketch so you can see exactly where the problem areas are.
Moisture Mapping
A moisture meter and thermal imaging camera scan walls, ceilings, and floors for hidden wet zones. The thermal camera reads temperature differences behind drywall, so we find damp cavities without cutting holes. Where we need to see inside, a boroscope inspection camera slips through a quarter-inch opening.
Air and Surface Sampling
We take air samples with a calibrated pump and surface samples with sterile swabs. Samples go to an accredited lab, and results come back in 24 to 48 hours. Air sampling compares indoor spore counts against an outdoor baseline, which is the standard way to confirm HVAC mold contamination.
Written Report and Scope
You get a report with photos, thermal images, moisture readings, lab results, and a room-by-room remediation scope. If remediation is needed, we explain what it involves and what it costs. If it isn't, we tell you that too and show you how to keep the area dry.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture Meter
Reads moisture content in drywall, wood, and concrete. Anything above 16 percent on drywall indicates active or imminent mold growth. We take readings at multiple points in every room.
Thermal Imaging Camera
Detects temperature differences behind walls and under floors to find hidden wet zones without cutting holes. It's the fastest way to map where moisture has traveled after a leak.
Boroscope Inspection Camera
Slips through a quarter-inch opening to see inside wall cavities, ductwork, and crawl spaces. It lets us confirm mold growth in closed cavities without demolition.
HEPA Vacuum
Captures mold spores and debris during remediation without releasing them back into the air. We use HEPA filters rated for particles down to 0.3 microns.
Air Scrubber and Negative Air Machine
Creates negative pressure inside containment so spores can't escape into clean areas. We run air scrubbers continuously during remediation and verify pressure with a manometer.
Dehumidifier
Removes moisture from the air and building materials after water damage. We use Dri-Eaz and Phoenix Restoration units sized to the square footage of the affected area.
Fogger
Applies antimicrobial solution into wall cavities and hard-to-reach spaces where physical removal isn't possible. We use it as a supplement to removal, never as a replacement.
Use cases
When to Schedule a Mold Inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

HVAC Mold in Panorama City Apartment
A tenant in a 1968 apartment building complained of musty odors every time the AC ran. The landlord had the coils cleaned but the smell came back. We inspected the air handler and ductwork with a boroscope camera and found mold growth on the interior duct lining. → We scoped duct cleaning and coil treatment, then verified with air sampling. Indoor spore counts dropped from 4,200 spores per cubic meter to 380, below the outdoor baseline of 520. The musty smell stopped.
Bathroom Mold in Valley Glen
A homeowner noticed dark staining along the caulk line and behind the shower tile. A previous contractor had cleaned the surface and re-caulked, but the staining returned within three months. The moisture source was a slow leak in the shower pan. → We traced the leak with a moisture meter, removed affected drywall and framing, treated with antimicrobial solution, and rebuilt the shower pan. Post-remediation testing confirmed clearance. The staining hasn't returned.
Problems we solve
Mold Problems We Solve in VAN NUYS
Most mold calls start with one of four problems. Here's what we see most often in VAN NUYS and how we handle each one.
Musty smell with no visible mold
We use a thermal imaging camera and moisture meter to find the hidden wet zone, then take air samples to confirm what's growing. A boroscope inspection camera lets us see inside the cavity without cutting a large hole.
Dark staining on drywall after a leak
We test the stain to confirm whether it's active mold or just water staining. If it's mold, we trace the moisture source, take air samples, and give you a remediation scope with square footage and material removal notes.
Crawl space mold in older homes
We inspect the crawl space with a moisture meter and boroscope, sample the air, and document the extent of growth. If remediation is needed, we remove affected insulation and framing, treat with antimicrobial solution, and install a new vapor barrier.
Mold coming back after remediation
We inspect the area, find the moisture source that was missed, and document it in a new report. Then we scope the work correctly, including the source repair, so the mold doesn't come back a third time.
Pricing process
Black Mold Inspection Pricing
$250 - $650 for residential; $400 - $1,200 for commercial
Property Size
A 1,200-square-foot home takes about 90 minutes to inspect. A 3,000-square-foot home takes three hours or more. Larger properties need more samples and more time, which increases the cost.
Number of Samples
Each air sample with lab analysis adds about $75. A typical inspection includes two to four air samples plus surface samples where visible growth is found. More samples give you a more complete picture.
Crawl Space or Attic
Crawl space and attic inspections add $100 to $200 because they require additional equipment and take longer. Older VAN NUYS homes often need both, especially after a wet winter.
How much does black mold inspection cost in VAN NUYS California?
Most residential inspections run $250 to $650 in 2026, depending on square footage and how many samples we take. A single air sample with lab analysis adds about $75. Crawl space and attic inspections cost more because they take longer and require more equipment. We quote the full price on the phone before we schedule, so there are no surprises.
Is black mold dangerous in VAN NUYS California homes?
Yes, when it's actively growing and releasing spores indoors. Stachybotrys chartarum produces mycotoxins that cause respiratory irritation, headaches, and immune responses in sensitive people. The risk depends on the species, the amount of growth, and how long you're exposed. Lab testing tells you exactly what you're dealing with, which is why we always sample rather than guess from appearance.
How do I know if I have black mold in VAN NUYS?
The three signs are a musty, earthy smell that won't go away, dark greenish-black staining on drywall or framing, and allergy-like symptoms that get worse in one specific room. If you've had a leak, a flood, or a persistently damp crawl space, the odds go up significantly. A moisture meter reading above 16 percent on drywall is a strong indicator that mold growth is active or imminent.
Who does toxic black mold testing in VAN NUYS California?
We do. Our IICRC-certified inspectors take air and surface samples, send them to an accredited lab, and deliver a written report within 48 hours. We handle apartments, single-family homes, commercial buildings, and crawl spaces. If you need toxic black mold testing in VAN NUYS California after a water event, call (833) 929-5837 and we'll schedule you the same day when possible.
Ready when you are
Schedule Your Black Mold Inspection in VAN NUYS, California
If you've seen dark staining, smelled something musty, or had a recent leak, don't wait. Mold spreads fast and the longer it grows, the more material has to come out. Call (833) 929-5837 and we'll schedule your inspection, often the same day. Upfront pricing, no surprises.

Talk with the local team
Request Black Mold Inspection
Call us any time at (833) 929-5837. We answer 24/7, including holidays, and dispatch same-day across Van Nuys and the San Fernando Valley. If you prefer email, send us a message and we'll respond within a few hours during business hours.


