
Thermal imaging, moisture mapping, and lab-backed answers in one visit
Mold Inspection Near Me in VAN NUYS, California
Mold Inspection Near Me in VAN NUYS, California means a certified inspector walks your home or building, finds the moisture feeding the growth, and hands you a written report with lab results. We handle crawl spaces off Sepulveda, attic sheathing near Vanowen, and post-leak walls along Van Nuys Boulevard. If you smell that musty odor, call (833) 929-5837.
What's included
What Our Mold Inspection Includes
Every inspection covers the full diagnostic sequence: walkthrough, moisture mapping, thermal imaging, sample collection, and a written report. Remediation is quoted separately if the lab confirms growth. You get the inspection data either way, and you are never obligated to hire us for the removal.
Full Visual Walkthrough
We inspect every room, closet, attic, crawl space, and mechanical area for visible growth, water staining, and musty odors. Photos document everything. This takes 30 to 45 minutes in a typical VAN NUYS single-family home.
Moisture Mapping
A calibrated moisture meter checks walls, baseboards, ceilings, and subfloor. Elevated readings get flagged and photographed. We trace the moisture back to its source, whether that is a slow leak, failed exhaust fan, or negative-grade slope outside.
Thermal Imaging Scan
A thermal imaging camera reveals temperature differences behind finishes that the naked eye cannot see. We scan suspect walls, ceilings, and floors to locate hidden moisture pockets. This is how we find mold behind tile and under cabinets.
Air and Surface Sampling
We pull air samples with a calibrated pump and take surface swabs or tape lifts from visible growth. Outdoor control samples go with them for baseline comparison. Samples ship to an accredited lab the same day.
Written Report with Scope
You receive a written report with photos, moisture readings, lab results, and a recommended scope of work. We walk you through it by phone and answer questions. Insurance adjusters and contractors can work directly from this document.
Service overview
Mold Inspection Near Me in VAN NUYS, California
Mold Inspection Near Me in VAN NUYS, California is a non-invasive diagnostic service that locates active mold growth, hidden moisture, and elevated airborne spores before you spend money on removal. A certified inspector walks the property with a moisture meter and thermal imaging camera, checks suspect cavities with a boroscope inspection camera, and pulls air and surface samples for lab analysis. You get a written report with photos, spore counts, and a scope of work you can hand to any contractor.
VAN NUYS homes sit in a warm, dry basin, but that does not stop mold. A slow supply-line drip behind a Valley Glen vanity, a Sepulveda Basin crawl space that stays damp after winter rain, or a bathroom exhaust fan venting into the attic all feed black mold growth and musty odors. If you have been searching for a mold assessment near me VAN NUYS, we schedule same-day inspections and deliver lab results fast, so you can act before the problem spreads.
The service timeline
What to Expect During Your Inspection
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
You call (833) 929-5837 and describe what you are seeing or smelling. We ask about recent leaks, roof work, or flooding, and we book a window that works for you. Same-day and next-day slots are usually open. You get a text confirmation with the inspector's arrival window.
Walkthrough and Interview
The inspector arrives, walks the property with you, and asks where you noticed the musty odor, staining, or symptoms. This takes 15 to 20 minutes and shapes where we focus. We check bathrooms, kitchens, attics, crawl spaces, and any room with prior water damage.
Moisture Mapping
We run a moisture meter across walls, baseboards, and ceilings, then scan with a thermal imaging camera to see temperature differences behind finishes. A boroscope inspection camera goes into wall cavities and under cabinets. Elevated readings get flagged and photographed.
Air and Surface Sampling
We pull air samples with a calibrated pump and take surface swabs or tape lifts from visible growth. Outdoor control samples go with them for baseline comparison. Samples ship to an accredited lab the same day, and results typically return in 24 to 72 hours.
Report and Scope
You receive a written report with photos, moisture readings, lab results, and a recommended scope of work. We walk you through it by phone and answer questions. If remediation is needed, we quote it clearly. If it is not, we tell you that too.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture Meter
Pin and pinless meters check moisture content in drywall, wood, and subfloor. Elevated readings flag hidden leaks and damp cavities that feed mold growth.
Thermal Imaging Camera
Reveals temperature differences behind finishes to locate hidden moisture pockets. Essential for finding mold behind tile, under cabinets, and inside wall cavities.
Boroscope Inspection Camera
A flexible camera that goes into wall cavities, under floors, and inside HVAC ducts. Lets us see mold growth without cutting open finished surfaces.
Air Sampling Pump
Calibrated pump pulls a known volume of air through a spore trap cassette. Samples ship to an accredited lab for species identification and spore count.
HEPA Vacuum
Captures mold spores and fine particulate during remediation. Used with HEPA filters to prevent cross-contamination between contained and clean areas.
Negative Air Machine
Maintains negative pressure inside containment so spores cannot escape into the rest of the building. Runs continuously during remediation.
Dehumidifier
Dri-Eaz and Phoenix Restoration units pull moisture from the air after a leak or flood. Drying the space fast is the best way to prevent mold from starting.
Use cases
When to Schedule a Mold Inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Mold from Exhaust Vent in Valley Glen
After winter rain, a homeowner found black staining on attic sheathing near the ridge. The bathroom exhaust fan had been venting directly into the attic, dumping warm moist air onto cold sheathing. Surface samples confirmed mold growth across roughly 60 square feet of sheathing. → We rerouted the exhaust vent outside, removed the affected sheathing under containment, and treated the framing with antimicrobial solution. Post-remediation air samples came back below outdoor baseline. The job took four days from inspection to clearance.
Crawl Space Mold Near Sepulveda Basin
A property manager called after a tenant complained of musty odors. The crawl space had no vapor barrier and stayed damp after winter rain. Mold was growing on joists and subfloor across roughly 200 square feet. Air samples showed elevated spore counts compared to outdoor baseline. → We installed a vapor barrier, removed mold from the joists and subfloor, and treated the framing with antimicrobial solution. Post-remediation air samples came back clear. The tenant's odor complaint was resolved within two weeks of the initial inspection.
Problems we solve
Mold Problems We Solve in VAN NUYS
Mold is a symptom, not the problem. The real issue is moisture, and finding it is what we do. Here are the most common situations we run into across VAN NUYS homes and buildings.
Musty odor with no visible mold
We use thermal imaging and a boroscope inspection camera to locate the hidden source. Air samples confirm species and spore counts. Once we find the moisture, we document it and give you a scope of work to fix it.
Black mold growth after a slow leak
We map the moisture, sample the growth, and confirm species through lab analysis. If it is Stachybotrys or another toxic species, we quote remediation under containment with HEPA filtration and post-remediation testing.
Crawl space mold near Sepulveda Basin
We inspect the crawl space with moisture meters and thermal imaging, sample the growth, and recommend vapor barrier and ventilation fixes. If remediation is needed, we remove growth and treat framing with antimicrobial solution.
Attic mold from bathroom exhaust
We inspect the attic, confirm mold with surface samples, and trace the moisture to the exhaust vent. We remediate the sheathing and recommend rerouting the vent outside so the problem does not come back.
Pricing process
Mold Inspection Pricing in VAN NUYS
$250 - $650 for most residential inspections; commercial and complex jobs quoted separately
Square footage
Larger homes take longer to inspect and require more samples. A 1,200-square-foot home might take two hours; a 3,000-square-foot home can take four or more. We quote based on the size of the property.
Number of samples
Air samples cost $50 to $75 each, and surface samples run $40 to $60. Most homes need two to four air samples plus one or two surface samples. More suspect areas mean more samples.
Crawl space or attic access
Crawl spaces and attics add time and complexity. If access is tight or the space is heavily contaminated, the inspection takes longer. We quote the add-on before we start.
How much does a mold inspection near me cost in VAN NUYS California?
Most residential inspections run $250 to $650 in 2026, depending on square footage and how many samples we pull. Air samples typically cost $50 to $75 each, and surface samples run $40 to $60. Crawl space and attic add-ons can push the total higher. We quote the full price before we start, so there are no surprises on the invoice.
Who does mold assessment near me in VAN NUYS?
We do. Our inspectors are IICRC WRT and AMRT certified and work to the ANSI/IICRC S520 Standard. We serve Van Nuys Central, Valley Glen, Lake Balboa, North Hills, Panorama City, and the surrounding areas. Call (833) 929-5837 and we will schedule a visit, usually same-day or next-day.
How long does a mold inspection take in VAN NUYS California?
A typical single-family home takes two to four hours. That includes the walkthrough, moisture mapping, thermal imaging, and sample collection. Larger homes, crawl spaces, and commercial buildings can take four to six hours. You get the written report within 24 to 72 hours after the lab returns results.
What does a mold inspector near me check in VAN NUYS?
We check every room for visible growth, musty odors, and water staining, then scan walls, ceilings, and floors with a moisture meter and thermal imaging camera. We inspect attics, crawl spaces, bathrooms, kitchens, and HVAC systems. We pull air and surface samples for lab analysis and document everything with photos in a written report.
Ready when you are
Book Mold Inspection Near Me in VAN NUYS, California
Call (833) 929-5837 and we will schedule a certified inspector, usually same-day or next-day. You get moisture mapping, thermal imaging, lab-backed air and surface samples, and a written report you can use for insurance or contractor bids. Licensed, insured, and bonded.

Talk with the local team
Request Mold Inspection Near Me
Call us any time at (833) 929-5837. We answer 24/7, including holidays, and dispatch same-day across Van Nuys and the San Fernando Valley. If you prefer email, send us a message and we'll respond within a few hours during business hours.



