
Find hidden mold before it spreads through your home
Mold Inspection in VAN NUYS, California
Mold Inspection in VAN NUYS, California locates active growth, hidden moisture, and airborne spores before they turn into a five-figure remediation bill. We inspect attics, crawl spaces, bathrooms, and HVAC systems across the San Fernando Valley with moisture meters, thermal imaging cameras, and lab-verified spore testing. If you smell something musty or see a stain spreading, call (833) 929-5837 and we will tell you exactly what is growing and where.
What's included
What Our Mold Inspection Includes
Every inspection is a full diagnostic, not a walkthrough with a flashlight. You get calibrated readings, lab-verified samples, and a written report you can act on. Lab fees and any remediation work are quoted separately so you can see exactly what each piece costs before you commit.
Full Visual Walkthrough
Every room, closet, cabinet, attic, and crawl space gets inspected for visible growth, water staining, and elevated humidity. We photograph anything suspicious and note the material type, because drywall, wood framing, and insulation each behave differently when wet.
Moisture Meter and Thermal Imaging
A DeWalt moisture meter and a thermal imaging camera read wall cavities, ceilings, and flooring from the surface. Elevated readings get confirmed with a boroscope inspection camera so we know whether the moisture is on the surface or inside the assembly.
Air and Surface Sampling
Calibrated air pumps run for a set volume in each affected zone, plus one outdoor control sample. Surface samples get lifted from visible growth with tape or swabs. All samples ship to an accredited lab the same day, with results in 24 to 48 hours.
HVAC System Check
We inspect the air handler, coil pan, condensate drain, and return plenum for mold growth and standing water. HVAC mold contamination spreads spores to every room in the house, so this step often explains a smell that has no obvious source in the living space.
Written Report With Lab Results
You get a report with photos, moisture readings, lab genus and spore counts, and a scoped recommendation. It is formatted for insurance adjusters, property managers, and real estate transactions, and we will walk your adjuster through the findings if needed.
Clear Next-Step Recommendation
The report ends with a plain recommendation: clean and dry, contain and remediate, or monitor. If remediation is needed, we scope it by square footage and material type so you know the cost before anyone starts cutting into your walls.
Service overview
What Mold Inspection in VAN NUYS, California Covers
Mold Inspection in VAN NUYS, California is a room-by-room, system-by-system evaluation that pinpoints where mold is growing, how much moisture is feeding it, and whether the air inside your home is contaminated. We start with a visual walkthrough, then confirm what we find with a moisture meter, a thermal imaging camera, and a boroscope inspection camera for wall cavities. Where growth is suspected, we pull air and surface samples and send them to an accredited lab. You get a written report with photos, lab results, and a clear scope of work.
VAN NUYS homes deal with a specific set of mold triggers: 100-degree summer afternoons that push HVAC systems hard, winter rain that finds every failed roof flashing, and slab-on-grade construction that traps moisture under flooring. A mold assessment VAN NUYS California catches these problems while they are still small. If you have had a roof leak, a slab leak, or a bathroom that stays damp after every shower, a professional mold inspection in VAN NUYS California is the fastest way to know whether you are looking at surface staining or active black mold growth behind the drywall.
The service timeline
Our Mold Inspection Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
We ask about the smell, the stain, the leak history, and any recent water damage. That conversation tells us whether to prioritize the attic, the crawl space, the HVAC system, or a specific wall. You get a same-day window and a flat inspection price before we hang up.
Visual Walkthrough
We inspect every room, closet, cabinet, and mechanical space. Attics get checked for roof-deck staining and wet insulation. Crawl spaces get checked for standing water and fungal growth on joists. Bathrooms get checked around the toilet base, shower pan, and vanity supply lines. We photograph everything we find.
Moisture Mapping
A DeWalt moisture meter and a thermal imaging camera show us what the eye cannot. We read wall cavities, ceiling assemblies, and flooring from the surface, then confirm with a boroscope inspection camera where readings are elevated. You see the same screen we see, so nothing is a mystery.
Air and Surface Sampling
We run a calibrated air pump for a set volume in each affected zone, plus an outdoor control sample for comparison. Surface samples get lifted from visible growth with tape or swabs. Samples ship to an accredited lab the same day, and results come back in 24 to 48 hours.
Report and Scope
You get a written report with photos, moisture readings, lab results, and a clear recommendation: clean and dry, contain and remediate, or monitor. If remediation is needed, we scope the work by square footage and material type so you know the cost before anyone starts cutting.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture Meter (DeWalt)
Reads moisture content in drywall, framing, and flooring without cutting into the surface. Pin and pinless modes let us scan large areas quickly, then confirm exact readings at the source.
Thermal Imaging Camera
Detects temperature differences that reveal hidden moisture behind walls, under flooring, and inside ceiling assemblies. It shows us where to focus the moisture meter and boroscope.
Boroscope Inspection Camera
Slides into wall cavities, ductwork, and crawl spaces through a small hole to show what is actually growing inside. Essential for confirming growth behind drywall without demolition.
Calibrated Air Sampling Pump
Draws a set volume of air through a spore trap cassette in each affected zone. Paired with an outdoor control sample, it gives lab-verified spore counts per cubic meter.
HEPA Vacuum and Air Scrubber
Captures spores and fine debris during inspection and remediation. HEPA filters trap particles down to 0.3 microns, which is what keeps contamination from spreading to clean rooms.
Negative Air Machine
Maintains negative pressure inside a containment barrier so spores cannot escape into the rest of the home during remediation. Standard equipment on every contained job.
Dehumidifier (Dri-Eaz, Phoenix Restoration)
Pulls moisture out of the air and materials after a water event. Drying the structure is what prevents mold from returning after remediation is complete.
Use cases
When to Schedule a Mold Inspection
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Roof Leak in Valley Glen
After a February storm, a Valley Glen homeowner heard dripping in the attic but could not find the source. By the time we arrived, the roof deck had visible dark staining across a 4-by-8-foot section, and the insulation below was saturated. Thermal imaging showed moisture had spread into the top plate of the wall below. → We sampled the deck and confirmed mold growth, then scoped attic mold testing and removal with containment, HEPA vacuuming, and antimicrobial treatment on the framing. The roofer repaired the flashing. Clearance testing at 30 days showed no active growth and moisture readings back to normal.
HVAC Contamination in Sherman Way Corridor
A property manager had a tenant complaining of a musty smell in a back bedroom for weeks. The room had no visible growth and no plumbing nearby. Our inspection of the rooftop air handler found a clogged condensate drain and standing water in the coil pan, with dark growth on the interior surfaces and the return plenum. → We scoped HVAC remediation with containment, removed the affected insulation liner, HEPA vacuumed the plenum, and treated the interior with antimicrobial solution. Post-remediation air sampling in the bedroom came back with spore counts comparable to the outdoor control. The tenant renewed the lease.
Problems we solve
Mold Problems We Solve for VAN NUYS Homeowners
Most mold calls start with one of five problems. Each one has a different cause, a different scope, and a different price tag, which is why guessing is expensive and testing is not.
Musty smell with no visible source
We run thermal imaging and moisture readings across every wall, then pull air samples from the affected zone and an outdoor control. Lab results tell us whether the smell is microbial, what genus it is, and where the moisture is coming from.
Dark staining on drywall or framing
We test the stain directly with surface sampling, confirm the species in a lab, and map the moisture feeding it. If it is Stachybotrys, we scope full containment and toxic mold removal. If it is a surface mold, we clean and dry and monitor.
Mold after a roof or slab leak
We document the moisture with readings and photos, sample the affected materials, and produce a report with timestamps that supports your claim. If remediation is needed, we handle water damage mold remediation and clearance testing under one warranty.
Crawl space mold on joists and subfloor
We inspect the crawl space with a boroscope and moisture meter, sample the joists, and identify the moisture source, whether it is groundwater, a plumbing leak, or poor ventilation. Then we scope crawl space mold removal and address the cause.
Pricing process
Mold Inspection Pricing in VAN NUYS
$250 - $650 for standard residential inspections, plus $50 - $90 per lab sample
Home Size and Layout
A 1,200-square-foot single-story home takes less time to inspect than a 3,000-square-foot two-story with a crawl space and multiple HVAC zones. Square footage drives the number of samples and the time on-site, which is the largest variable in the inspection price.
Number of Lab Samples
Each air or surface sample runs $50 to $90 at the lab. A single-room concern might need two samples plus an outdoor control. A whole-home inspection with multiple affected zones can run six to ten samples. We tell you the sample count and cost before we pull anything.
Access to Attic and Crawl Space
A clean, well-lit attic with a full-size access panel is quick to inspect. A low-clearance crawl space with a small hatch and standing water takes longer and requires more equipment. Difficult access adds time, not mystery fees.
What is included in a mold inspection in VAN NUYS California?
A full inspection includes a visual walkthrough of every room, attic, and crawl space, moisture meter and thermal imaging readings, boroscope checks inside wall cavities, and air plus surface sampling sent to an accredited lab. You get a written report with photos, lab results, and a scoped recommendation. Most homes take two to four hours on-site, with lab results back in 24 to 48 hours.
How much does mold inspection cost in VAN NUYS California?
Typical 2026 pricing in this area runs $250 to $650 for a standard residential inspection, with lab fees of $50 to $90 per sample. Larger homes, commercial spaces, and crawl space or HVAC-specific inspections run higher. You get a flat quote before we arrive, and the price does not change based on findings. Call (833) 929-5837 for a same-day number.
Do I need a mold assessment in VAN NUYS California if I only smell something musty?
Yes. A musty odor is the most common sign of hidden mold growth, usually behind drywall, under flooring, or inside an HVAC plenum. By the time you smell it, spores are already circulating. A mold assessment in VAN NUYS California confirms whether the smell is microbial, where it is coming from, and whether the air in your living space is affected. Guessing wastes money; testing ends the question.
How often should I get mold inspection in VAN NUYS?
Every 12 to 24 months for most homes, and immediately after any water event: a roof leak, a slab leak, a toilet overflow, or a supply line failure. VAN NUYS homes near Sepulveda Basin and the Sherman Way Corridor see more groundwater intrusion during winter storms, so an annual check before the rainy season is smart. If you have had remediation before, schedule post-remediation mold testing at the 30-day mark.
Ready when you are
Book Your Mold Inspection in VAN NUYS, California Today
If you smell something musty, see a spreading stain, or just had a water event, do not wait for it to get worse. Call (833) 929-5837 and we will schedule a same-day mold inspection in VAN NUYS, California with a flat price quoted before we arrive. Lab results in 24 to 48 hours.

Talk with the local team
Request Mold Inspection
Call us any time at (833) 929-5837. We answer 24/7, including holidays, and dispatch same-day across Van Nuys and the San Fernando Valley. If you prefer email, send us a message and we'll respond within a few hours during business hours.



