
Licensed mold assessor in VAN NUYS California for same-day testing and lab results
Certified Mold Inspector in VAN NUYS, California
A Certified Mold Inspector in VAN NUYS, California is the person you call when a musty smell, a water stain, or a failed home inspection needs a straight answer. We are a licensed mold assessor in VAN NUYS California, and we inspect attics, crawl spaces, bathrooms, and HVAC systems across the San Fernando Valley. Same-day appointments, thermal imaging, and lab results you can hand to a buyer, a landlord, or an insurance adjuster.
What's included
What Our Certified Mold Inspection Includes
Every inspection covers the full property, not just the room you are worried about. Mold travels through wall cavities and ductwork, so we check the whole building envelope. Here is what comes standard, and what we add on when the situation calls for it.
Full Property Walkthrough
Attic, crawl space, basement, bathrooms, kitchen, laundry, and HVAC air handler. We check the building envelope for roof leaks, plumbing failures, and grading issues that let water in. Most single-family homes take 90 minutes to three hours on site.
Moisture and Thermal Imaging
A moisture meter on drywall, framing, and subfloor, plus a thermal imaging camera to find hidden water behind tile, stucco, and cabinetry. Thermal imaging is included in the base price, not billed as an add-on, because it is the fastest way to find a leak you cannot see.
Air and Surface Sampling
Calibrated air pumps pull spore samples from the rooms with the strongest odors, plus an outdoor baseline for comparison. Surface samples with sterile swabs confirm what is growing on visible staining. Each sample runs roughly $60 to $90 on top of the base inspection.
Written Report With Lab Results
A report naming the mold genus, spore counts, moisture readings, and photo documentation, delivered in 24 to 72 hours. It follows the ANSI/IICRC S520 Standard, which is what carriers, escrow officers, and code officials expect to see.
Phone Walkthrough of Findings
We call you when the report lands and go through it line by line. You get a plain-language scope of what needs to come out, what can be cleaned, and what the moisture fix looks like. No pressure to book remediation with us.
Post-Remediation Verification
If you hire us for the cleanup, we come back after the work is done and re-test the same locations. Clearance testing confirms spore counts have dropped to normal levels before the containment comes down and the space goes back into use.
Service overview
What a Certified Mold Inspector in VAN NUYS, California Does
A Certified Mold Inspector in VAN NUYS, California is a trained, credentialed professional who locates mold growth, traces the moisture feeding it, and documents both with instruments and lab samples. We do not guess from a smell. We use a moisture meter on drywall and framing, a thermal imaging camera to find hidden water behind tile and stucco, and a boroscope inspection camera inside wall cavities and ductwork. Every inspection ends with a written report that names the mold genus, the moisture source, and the scope of affected material.
VAN NUYS homes need this more than most. The valley swings from 100-degree summers to cold, damp winters, and the housing stock runs from 1940s bungalows near Van Nuys Boulevard to mid-century apartments along Sherman Way. Flat roofs, original galvanized plumbing, and swamp coolers converted to central air all leak quietly. If you have been searching for a certified mold inspector in VAN NUYS California near me and getting nothing but franchise call centers, we are the local crew that actually walks the property.
The service timeline
How Our Mold Inspection Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone Intake
You call (833) 929-5837 and tell us what you are seeing: a stain on the ceiling, a musty closet, a cough that will not quit, or a failed inspection report. We ask about the age of the home, recent water damage, and whether the property is in escrow. That call takes about ten minutes and sets the scope.
On-Site Walkthrough
A certified assessor walks the property with a moisture meter and thermal imaging camera, checking attics, crawl spaces, bathrooms, under sinks, and around the HVAC air handler. We look behind baseboards and inside wall cavities with a boroscope inspection camera. Expect 90 minutes to three hours depending on square footage.
Sampling and Documentation
We take air samples with calibrated pumps and surface samples with sterile swabs, then photograph every reading. Samples go to an accredited third-party lab, not to us, so the results are independent. Chain-of-custody paperwork is filled out on site and copied to you.
Lab Results and Report
Results come back in 24 to 72 hours. You get a written report with the mold genus, spore counts, moisture readings, photo documentation, and a scope of affected materials. We walk you through it by phone and answer questions until it makes sense.
Scope and Next Steps
If remediation is needed, the report spells out containment, HEPA filtration, and material removal in plain language. If it is a small bathroom mold issue you can handle with an antimicrobial solution, we tell you that too. You decide what happens next, and we can schedule the work or hand the report to your own contractor.
Tools & methods
Tools and Methods We Use on Every Inspection
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Finds temperature differentials behind tile, stucco, and cabinetry that reveal hidden moisture without opening the wall. It is the fastest way to locate a leak you cannot see.
Moisture Meter
Reads actual moisture content in drywall, framing, and subfloor. We use it to confirm what the thermal camera suggests and to establish a baseline for post-remediation verification.
Boroscope Inspection Camera
Slides inside wall cavities, ductwork, and crawl spaces to show what is growing where the eye cannot reach. It is how we confirm growth inside a wall without cutting a hole.
Calibrated Air Sampling Pumps
Pull a measured volume of air through a spore trap so the lab can report spores per cubic meter. We run one indoor sample per affected room plus an outdoor baseline for comparison.
HEPA Vacuum and Air Scrubber
Captures spores at 0.3 microns and larger during remediation. We run air scrubbers inside containment to keep spores from migrating into clean areas of the home.
Negative Air Machine
Maintains negative pressure inside containment so air flows in, not out. It is a requirement under the ANSI/IICRC S520 Standard for any remediation beyond a small patch.
Dri-Eaz Dehumidifiers and Air Movers
Dry wet structural material before remediation starts. Mold will not stop growing while the framing is still wet, so drying comes first on every water damage job.
Use cases
When to Call a Certified Mold Inspector
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Mold After a Roof Leak in Lake Balboa
A roof flashing failed during a winter storm and water ran down the underside of the roof decking for weeks before anyone noticed. By the time the homeowner called, mold covered about 60 square feet of sheathing and two rafters, with a strong musty odor in the back bedroom below. → We set containment, removed the affected sheathing, and treated the rafters with an antimicrobial solution. The roofer replaced the flashing, and clearance testing confirmed spore counts had dropped to normal. The bedroom odor cleared once the attic was sealed back up.
Bathroom Mold Behind Tile in a Sherman Way Apartment
A tenant reported a musty smell and peeling caulk around the tub. A boroscope inspection camera showed growth behind the tile and on the framing around the shower valve, fed by a slow drip from a failed valve packing. The adjacent bedroom air sample came back with elevated spore counts. → We removed the affected tile and backer board, treated the framing, and replaced the shower valve. Post-remediation testing showed the bedroom spore count back at the outdoor baseline, and the tenant renewed the lease.
Problems we solve
Mold Problems We Solve for VAN NUYS Properties
Most mold calls come down to one of a handful of scenarios. Here is what we see most often in the valley and how we handle each one.
Musty odor with no visible growth
We use a thermal imaging camera and boroscope inspection camera to find the hidden moisture, then pull air samples from the affected rooms. Once the lab confirms the genus and spore count, we know whether it is a small cleanup or a containment job.
Crawl space mold after a plumbing leak
We inspect the joists and subfloor with a moisture meter, test for active growth, and remove affected material with HEPA vacuuming and antimicrobial treatment. Then we restore the vapor barrier and address the plumbing leak that started it.
Attic mold from poor ventilation
We inspect the sheathing and rafters, test for active colonization, and if remediation is needed, remove affected material and treat the framing with an antimicrobial solution. We also flag the ventilation and roof leak issues that caused it.
Mold flagged during a real estate inspection
We prioritize escrow timelines and turn reports around in 24 to 72 hours. The documentation follows the ANSI/IICRC S520 Standard, so lenders, agents, and buyers accept it without a second opinion or a re-inspection.
Pricing process
Certified Mold Inspector Pricing in VAN NUYS
$250 - $650 for most residential inspections; commercial and multi-unit quoted per property
Property Size
A 900-square-foot apartment takes far less time to inspect than a 3,500-square-foot house with a crawl space and detached garage. Square footage drives the base price more than any other factor.
Number of Samples
Each air sample runs roughly $60 to $90, and surface swabs run similar. Most homes need two to four air samples plus an outdoor baseline, but a large property with multiple affected rooms may need six or more.
Access Difficulty
A crawl space with a tight hatch or an attic with no walkway takes longer to inspect safely. We quote that upfront rather than surprising you with it on the invoice.
What does a certified mold inspector do in VAN NUYS California?
A certified mold inspector locates mold growth, identifies the moisture source feeding it, and documents both with instruments and lab samples. In VAN NUYS that means checking attics, crawl spaces, bathrooms, and HVAC systems with a moisture meter, thermal imaging camera, and boroscope. You get a written report naming the mold genus, spore counts, and the scope of affected material, typically within 24 to 72 hours.
How much does a certified mold inspector cost in VAN NUYS?
Most residential inspections in VAN NUYS run $250 to $650 in 2026, depending on square footage and how many samples are pulled. A single air sample adds roughly $60 to $90, and thermal imaging is included in the base price. Commercial and multi-unit properties run higher. You get the full price before we schedule, and there is no charge for the phone consultation.
How do I verify a mold inspector certification in VAN NUYS California?
Ask for the credential name and the issuing body, then check that body's public directory. Legitimate assessors hold ACAC Certified Microbial Consultant or IICRC AMRT credentials, and both are verifiable online. You can also ask whether the firm follows the ANSI/IICRC S520 Standard and carries liability insurance. Any inspector who dodges those questions is not one you want in your crawl space.
Is a licensed mold assessor required in VAN NUYS California?
California does not license mold assessors the way it licenses contractors, so there is no state mold license number to check. Instead, look for third-party certification through ACAC or IICRC, plus a California Contractors State License Board (CSLB) license if the firm also performs remediation. We hold both the certifications and the contractor credentials, and we will show you the paperwork.
Ready when you are
Book a Certified Mold Inspector in VAN NUYS, California
Same-day appointments, 24/7 emergency dispatch, and lab results in 24 to 72 hours. Call (833) 929-5837 and we will get an assessor to your property today.

Talk with the local team
Request Certified Mold Inspector
Call us any time at (833) 929-5837. We answer 24/7, including holidays, and dispatch same-day across Van Nuys and the San Fernando Valley. If you prefer email, send us a message and we'll respond within a few hours during business hours.


