Mold Remediation Company

Certified crews, containment up the same day you call

Mold Remediation Company in VAN NUYS, California

Mold Remediation Company in VAN NUYS, California is what you call when black mold shows up behind drywall, under the house, or in the attic after a leak. We are a licensed mold removal company VAN NUYS California homeowners and property managers keep on speed dial. Our IICRC-trained technicians run moisture meters, thermal imaging cameras and HEPA air scrubbers, then clear the job with post-remediation testing. Call (833) 929-5837.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Our Mold Remediation Service Includes

Every remediation job we run includes the core steps below. Add-ons like dry ice blasting, full crawl space encapsulation, or HVAC duct cleaning get quoted separately once we see the scope. You always get a flat written price before work starts, and nothing gets added without your approval.

01

Moisture Mapping and Inspection

We use a moisture meter, thermal imaging camera, and boroscope inspection camera to find hidden growth behind walls and under floors. You get photos and readings in writing, which is what your insurance adjuster needs to see.

02

Containment and Air Scrubbing

Plastic containment sheeting seals the work zone, and a negative air machine plus HEPA air scrubbers keep spores from spreading through the house. Crews wear disposable coveralls and respirator cartridges the entire time they are inside containment.

03

Removal and Disposal

Contaminated drywall, insulation, and framing get cut out, bagged, and hauled off per California disposal rules. We HEPA-vacuum every exposed surface before applying an antimicrobial solution and mold encapsulant.

04

Structural Drying

Dri-Eaz dehumidifiers and Phoenix Restoration air movers run until framing moisture reads below 16 percent. We log readings daily and keep equipment in place until the structure is genuinely dry, not just dry to the touch.

05

Clearance Testing and Report

An independent third-party inspector takes post-remediation air samples and compares them to an outdoor baseline. You receive the clearance report, moisture log, and a written scope of everything removed and treated.

Service overview

What a Mold Remediation Company in VAN NUYS, California Does

A Mold Remediation Company in VAN NUYS, California is a licensed, insured contractor that finds the moisture feeding mold growth, contains the affected area, removes contaminated material, and treats the structure so spores do not come back. We do not just spray bleach on a wall and call it done. We map the moisture with a meter and thermal imaging camera, cut out what is ruined, HEPA-vacuum the cavity, and run air scrubbers and negative air machines until spore counts drop. Every job follows the ANSI/IICRC S520 Standard for professional mold remediation.

Most VAN NUYS calls start the same way: a slow supply-line leak under a 1950s slab, a bathroom exhaust that dumps into the attic, or a crawl space that stays damp all winter. By the time you smell that musty odor, mold has usually been growing 48 to 72 hours. If you have been searching for a mold remediation company in VAN NUYS California near me, we answer the phone 24/7 and can have a crew at your door the same day.

Same-Day ContainmentWe set a plastic containment barrier and start a negative air machine on arrival, usually within 2 to 4 hours of your call. That stops spores from spreading into bedrooms and kitchens while we work. For emergency mold remediation company VAN NUYS California requests, we run crews 24/7, including weekends.
Certified Technicians OnlyEvery tech on your job holds IICRC WRT and AMRT credentials, and our firm is an IICRC Certified Firm. That means they know the difference between surface mildew and toxic mold exposure risk, and they document every step for your insurance adjuster. No subs, no day labor.
Insurance Paperwork HandledWe photograph affected materials, log moisture readings, and write the scope in the format adjusters expect. Most water damage mold claims in VAN NUYS get approved faster when the remediation report is clean. We bill carriers directly and walk you through your deductible before work starts.
Mold Remediation Service Van Nuys serving VAN NUYS, California
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Mold Remediation Process Works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Inspection and Testing

A certified inspector walks the property with a moisture meter, thermal imaging camera, and boroscope inspection camera to find hidden growth behind walls and under floors. We collect air and surface samples for lab analysis. This takes 60 to 90 minutes, and you get the written findings within 24 hours.

Stage 1
02

Containment Setup

We seal the work zone with plastic containment sheeting and duct tape, then install a negative air machine and HEPA air scrubbers so spores cannot travel through the house. Crews suit up in disposable coveralls and respirator cartridges. Setup runs 1 to 2 hours depending on square footage.

Stage 2
03

Removal and Treatment

Contaminated drywall, insulation, and framing get cut out, bagged, and hauled away. We HEPA-vacuum every surface, then apply an antimicrobial solution and mold encapsulant. Tough jobs on block or brick get dry ice blasting machine treatment, which strips growth without water or harsh chemicals.

Stage 3
04

Drying and Air Cleaning

Dri-Eaz dehumidifiers and Phoenix Restoration air movers run until framing moisture drops below 16 percent on the meter. That usually takes 2 to 4 days. We check readings daily and adjust equipment until the structure is genuinely dry, not just dry to the touch.

Stage 4
05

Clearance Testing

An independent third-party inspector takes post-remediation air samples and compares them to an outdoor baseline. Once spore counts pass, we hand you the clearance report, the moisture log, and a written scope of what was removed. Most full jobs wrap in 5 to 7 days.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Moisture Meter and Thermal Imaging Camera

Locates hidden moisture behind walls, under floors, and in ceilings without cutting exploratory holes. Thermal imaging shows temperature differences that reveal wet framing.

02

Boroscope Inspection Camera

Slides inside wall cavities and behind baseboards to confirm growth where the eye cannot see. It is how we avoid tearing out more drywall than necessary.

03

HEPA Vacuum and Air Scrubber

Captures spores down to 0.3 microns during and after removal. Air scrubbers run continuously inside containment to keep the rest of the house clean.

04

Negative Air Machine

Creates negative pressure inside containment so air flows in, not out. That single setup step is what keeps spores from reaching bedrooms and kitchens.

05

Dri-Eaz Dehumidifiers and Phoenix Restoration Air Movers

Pull moisture out of framing and subfloor after removal. We run them until meter readings drop below 16 percent, which usually takes 2 to 4 days.

06

Dry Ice Blasting Machine

Strips mold from block, brick, and rough framing without water or abrasive media. It leaves no chemical residue and works well in crawl spaces and unfinished basements.

07

Fiberlock, Concrobium, and RMR-86 Treatments

Antimicrobial solutions and mold encapsulants that treat surfaces after removal. Benefect and ShockWave get used where a botanical or low-odor product is preferred.

Use cases

When to Call Us for Mold Remediation

These examples show how the service framework adapts rather than forcing every call through one repair.

Mold Remediation Company
Bathroom Wall Cavity in Van Nuys CentralA slow supply-line leak behind a bathroom vanity soaked the drywall and framing for roughly three weeks. Black mold growth covered about 12 square feet of wall cavity, and the musty odor had spread into the adjacent bedroom. → We contained the bathroom, cut out the affected drywall, HEPA-vacuumed the cavity, and treated the framing with an antimicrobial solution and encapsulant. Drying equipment ran for three days. Clearance testing came back at normal outdoor spore levels.

Crawl Space in Lake Balboa

A 1955 crawl space had no vapor barrier, and the soil stayed damp year-round. Insulation was contaminated across roughly 400 square feet, and floor joists showed surface growth. The living room above smelled musty every winter. → We removed the contaminated insulation, treated joists and subfloor, and installed a proper vapor barrier across the entire crawl space. A dehumidifier now keeps humidity below 55 percent. The odor in the living room cleared within a week.

Attic Sheathing in North Hills

A bathroom exhaust fan had been dumping moist air into the attic for years. Roof sheathing showed dark staining across about 200 square feet, and insulation near the fan was damp and compressed. → We tested the sheathing, removed and replaced the contaminated plywood, treated the framing, and rerouted the exhaust fan to vent outside through the roof. Clearance testing passed on the first try.

Problems we solve

Mold Problems We Solve in VAN NUYS

Most mold calls trace back to one of a handful of causes. Here are the ones we see most often in Van Nuys, what happens if you leave them alone, and how we fix them.

ISSUE

Black mold growth behind bathroom walls

We cut out the affected drywall, treat the framing with an antimicrobial solution, correct the ventilation that caused it, and verify the air is clean with post-remediation mold testing.

SYMPTOM

Crawl space mold from poor vapor barriers

We remove contaminated insulation, treat joists and subfloor, and install a proper vapor barrier. A Dri-Eaz dehumidifier keeps the space dry going forward.

SIGN

Attic mold from bathroom exhaust fans

We test the sheathing, remove contaminated plywood where needed, and reroute the exhaust fan to vent outside. That fixes the cause, not just the symptom.

ALERT

Water damage mold after a slab leak

We extract standing water, dry the structure with air movers and dehumidifiers, then remediate any growth in the wall cavity and test the air before we close up.

Pricing process

What Mold Remediation Costs in VAN NUYS

$1,200 - $10,000+ depending on scope

Phase 01

Square footage affected

A single bathroom wall might be 12 square feet; a full crawl space can be 400 or more. Containment, removal, and treatment all scale with area, which is why this is the biggest single driver of cost.

Phase 02

Depth of growth

Surface growth on tile or painted block cleans up fast. Growth that has soaked into drywall paper, insulation, or framing means removal and replacement, which adds labor and disposal costs.

Phase 03

Material type

Drywall and insulation come out quickly. Block, brick, and rough framing take longer and often need dry ice blasting machine treatment, which is a higher-skill, higher-cost method.

Questions before we arrive

Frequently Asked Questions

Mold Remediation Company
Call (833) 929-5837
How much does a mold remediation company cost in VAN NUYS California?

Most residential jobs in Van Nuys run $1,500 to $6,500 in 2026, with small bathroom or attic jobs starting around $1,200 and whole-house crawl space work reaching $10,000 or more. Price depends on square footage affected, how deep the growth goes, and whether we are cutting out drywall or treating block. You get a written number before we start.

How do I choose a mold remediation company in VAN NUYS?

Check three things: IICRC certification, CSLB registration, and whether they do third-party clearance testing. A company that tests its own work has a conflict of interest. Ask for the technician's AMRT credential, ask what containment they use, and ask for the moisture readings in writing. If a quote comes in far below everyone else, they are probably skipping containment or air scrubbing.

Is mold remediation company covered by insurance in VAN NUYS California?

Yes, in most cases. Sudden and accidental water damage, like a burst pipe or a water heater failure, is typically covered, and remediation is part of that claim. Long-term neglect or gradual leaks usually are not. We document everything with photos and moisture logs, bill your carrier directly, and tell you straight if a claim is likely to be denied.

What does a mold removal company do in VAN NUYS California?

A mold removal company VAN NUYS California property owners hire finds the moisture source, contains the affected area with plastic sheeting and negative air pressure, removes contaminated materials, HEPA-vacuums and treats the structure, dries it out, and verifies the result with clearance testing. The whole process usually takes 5 to 7 days for an average home.

Ready when you are

Call Your Mold Remediation Company in VAN NUYS, California

Mold spreads fast, and every day you wait adds square footage to the job. Call (833) 929-5837 now and we will dispatch a certified crew, set containment, and give you a flat written price before any work begins. Same-day service, 24/7, licensed and insured in California.

Mold Remediation Company

Talk with the local team

Request Mold Remediation Company

Call us any time at (833) 929-5837. We answer 24/7, including holidays, and dispatch same-day across Van Nuys and the San Fernando Valley. If you prefer email, send us a message and we'll respond within a few hours during business hours.

6801 1/2 Woodman Ave, Van Nuys, CA 91405, USA, VAN NUYS, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now